73.
2
8. Tape the pins and rings.
2
5. - Person 1 Pulls the mast by hanging easily on the trapeze
lines.
- Person 2 Pushes the mast upwards, still making sure the
mastfoot doesn’t hit the crossbar.
4. - Person 1 Grabs the trapeze lines located at the front crossbar.
6. - Person 1 Holds the mast forward pulling on the
trapeze lines.
- Person 2 Grabs the forestay with turnbuckle.
7. - Person 2 Attaches the forestay turnbuckle to the bridle connector.
1
STEP 5
1
STEP 7
To Next Page
Loading...
