6. - Person 1 Pulls the mast by
hanging easily on the trapeze lines.
- Person 2 Pushes the mast upwards, still making
sure the mastfoot doesn’t hit the crossbar.
5. - Person 1 Grabs the trapeze lines located at the
front crossbar.
7. - Person 1 Holds the mast forward pulling on the
trapeze lines.
- Person 2 Grabs the forestay with turnbuckle.
8. - Person 2 Attaches the forestay turnbuckle to the
bridle connector.
2
1
STEP 6
9. Tape the pins and rings.
1
2
STEP 8
10. Put tension on the shrouds.
28
To Next Page
Loading...
