Nacra F18 Evolution - 7 Standing Rigging

size material associated Hardwere Options or restrictions
Qty Length Diam.
mm mm
Forestay 1
6775
(1)
4.0
Standard 1 X 19 stainles
steel wire
Turnbucle 4mm calibrated
partnr:32401
length ± 5 mm
Shrouds 2
6890
(1)
4
Standard 1 X 19 stainles
steel wire
Turnbucle 4mm calibrated
partnr:32401
length ± 5 mm
Diamonds 2
6100
(1)
4
Standard 1 X 19 stainles
steel wire
Turnbucle 4mm calibrated
partnr:32401
length ± 5 mm
Bridle wire 2
1080
(2)
4
Standard 1 X 19 stainles
steel wire
length ± 5 mm
Bowsprit bridle 2
1580 (3)
3
Dyneema sk75/80
length ± 5 mm
Trapeze lines 4
6370
(2)
3
Dyneema sk75/80
Trapeze t-handle partnr:30515 length ± 5 mm
(1) length is the distance taken between the bearing surface of the rigging and the end of the tread of the turn buckle
(2) length is the distance taken between the bearing surface of the rigging
(3) length is the distance taken between the bearing surface exlcuding the shackle of the rigging and the bowsprit frond endcap
Dyneema measurements are measured pre stratched
Advisory and standard supplied standing rigging measurements Nacra F18 Evolution
7. Standing rigging
47