Nacra F18 Evolution - Mastrotation; Spinnaker halyard

4.9 Mastrotation
1. Open the mastrotation soft shackle.
4.10 Spinnaker halyard
3. Feed the end of the spinnaker halyard (the one
coming out of the cleat from the 40mm block)
through the most front 29mm block on the
trampoline.
2. Feed the loop through to the mast rotator
wishbone.
3. Feed the knot through the loop and pull.
4. Feed the line through the rings and over the
V-strap.
5. Feed the line through the 29mm block in front of
the ovel grommet and pull the line underneath
the trampoline.
38
• Continue from 2.5 Spinnaker halyard step 7.
1. Feed the pre- installed line coming out of the
bowsprit through the 16mm block located on
the front crossbar and attach the 29mm T2
block to the end.
2. Feed the spinnaker halyard rst through the
29mm T2 block and then through the 40mm
block located on the mast.
1
1
2
2
3
3
4
4
4
4
5