NAD 512 - Disassembly Instructions; Top Cover Removal

DISASSEMBLY INSTRUCTIONS
TOP COVER REMOVAL
1; Remove machine screws M 4.0 x 6.0 (@) to ® ) from the side panels.
Remove tapping screw 3.0 x 8.0 © from the back panel.
Refer to figure No. 1.
Figure No. 1. @)
2. Pull both sides of the TOP COVER slightly outwards and tilt approx. 35° and then remove in
the direction as indicated by pointer @) in figure No. 2.
Figure No. 2.