NAD C368 - Table of Contents; Getting Started; Whats in the Box; Choosing a Location

INTRODUCTION
GETTING STARTED
WHAT’S IN THE BOX
Packed with your C 368 you will nd
• Two detachable mains power cord
• SR 9 remote control with 2 AA batteries
• Bluetooth antenna
• Quick Setup Guide
SAVE THE PACKAGING
Please save the box and all of the packaging in which your C 368 arrived.
Should you move or need to transport your C 368, this is the safest
container in which to do so. We’ve seen too many otherwise perfect
components damaged in transit for lack of a proper shipping carton so,
please: Save that box!
CHOOSING A LOCATION
Choose a location that is well ventilated (with at least several inches to
both sides and behind), and that will provide a clear line of sight, within
25 feet / 8meters, between the C 368’s front panel and your primary
listening/viewing position—this will ensure reliable infrared remote control
communications. The C 368 generates a modest amount of heat, but
nothing that should trouble adjacent components.
RESTORING C 368 TO ITS FACTORY DEFAULT SETTINGS
Press and hold both front panel’s a SOURCE s buttons until the display
shows “FACTORY RESET”. Release both a SOURCE s buttons afterwards.
IMPORTANT SAFETY INSTRUCTIONS .........................2
INTRODUCTION
GETTING STARTED ...............................................4
WHAT’S IN THE BOX ..................................................4
CHOOSING A LOCATION .............................................4
RESTORING C 368 TO ITS FACTORY DEFAULT SETTINGS ...............4
IDENTIFICATION OF CONTROLS
FRONT PANEL ....................................................5
REAR PANEL .....................................................6
MDC CLASSIC UPGRADE SLOTS ......................................8
MDC HDM2 ..........................................................8
DD USB 2.0 ...........................................................8
MDC BluOS ...........................................................8
SR 9 REMOTE CONTROL ..........................................9
USING THE SR 9 REMOTE CONTROL ..................................9
USING THE SR 9 REMOTE CONTROL LIBRARY ....................... 11
NAD REMOTE APP ...............................................12
USING THE NAD REMOTE APP ...................................... 12
OPERATION
USING THE C 368 ................................................13
ACCESS MAIN MENU ............................................... 13
NAVIGATING THE MENU OPTIONS AND MAKING CHANGES ........ 13
SOURCE SETUP ..................................................... 13
ENABLED ........................................................... 13
NAME .............................................................. 13
VOLUME CONTROL ................................................. 13
SETTINGS ........................................................... 14
TONE CONTROLS ................................................... 14
BASS, TREBLE, BALANCE ............................................ 14
FILTERS ............................................................. 14
PRE OUT/SUBWOOFER ............................................. 15
SPEAKER CHANNEL ................................................. 15
TEMPORARY DISPLAY .............................................. 15
DIMMER ............................................................ 15
NETWORK STANDBY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
AUTO STANDBY .................................................... 15
AUTO SENSE ....................................................... 16
IR CHANNEL ........................................................ 16
IR LEARNING DEVICE ............................................... 17
BT WORK MODE .................................................... 17
C368 AS A BLUETOOTH SINK ....................................... 17
C368 AS A BLUETOOTH SOURCE ................................... 18
VOLUME DISPLAY MODE ........................................... 18
FIRMWARE VERSION ................................................ 19
FIRMWARE UPGRADE ............................................... 19
MDC CARD UPGRADE .............................................. 19
BLUOS SETUP ...................................................... 19
REFERENCE
SPECIFICATIONS ................................................20
4
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ