NAIM UnitiLite - 4 Configuration; The Inputs Menu; The Language Menu; The Setup Home Menu

16
4. Configuration
Once your Uniti Series product is installed with mains power, speakers, network, radio aerial and any external connections
made, it can be switched on and set up for use.
The degree to which you modify the default settings will depend upon the uses to which you put your Uniti Series product
and the extent to which you use its capabilities. It may be that you have no need to modify the default settings at all, however
we would encourage you to read this section of the manual in order that you gain a full understanding of your Uniti Series
product’s capabilities. The following paragraphs describe each setup menu in turn, starting with the home menu.
Select setup mode by pressing the handset setup ( ) key. Navigate around the setup menus using the handset navigation
keys (563) and make selections using the ok/list key. Exit setup by pressing the exit key.
4.1 The Setup Home Menu
The home menu provides access to
the setup menus. The function of
each menu is as follows:
Language: Enables the
user interface
language to be changed.
Inputs: Enables various parameters for each
internal, external and streaming input
to be congured.
Rooms: Enables multiroom streaming to
Naim streamer units. The Rooms menu
is only visible when the multiroom input
is enabled.
Speakers: Congures speaker output options.
Headphones: Congures headphone output options.
Network Settings: Congures network connection
settings.
Front Display: Congures display features.
Clock & Alarm: Congures the clock and alarm.
Handset Keys: Enables inputs to be assigned to
specic handset keys. Also enables
conguration of the handset navigation
(3456) keys.
Factory Settings: Enables interrogation of status,
deletion of all user presets and return
to factory default settings.
Each of the setup menus is described in detail in the
following sections. Use the handset up (5) and down
(6) and ok/list keys to select a setup menu and make
adjustments.
4.2 The Language Menu
The Language menu enables the
user interface language to be
changed. Select setup mode and
use the handset ok/list key to select
Language. Use the handset up (5)
and down (6) and ok/list keys to select a language. Exit
setup mode by pressing the handset exit key.
4.3 The Inputs Menu
The Inputs menu enables a variety
of parameters to be selected for
each internal and external input.
These parameters dene how
control of inputs behaves. The
options available for each are described in the following
sections.
4.3.1 CD Input
UnitiLite • NaimUniti 2
Parameter Options
Enabled: Yes / No
Name: User denable
Input Trim: ±10dB
Auto Select: Yes/No. If Yes
is specied the internal CD input will
be selected automatically when the
drawer is closed and a disc loaded
(NaimUniti 2 only).
Auto Play: Yes / No. If Yes is selected play will
start automatically when a disc is
loaded.
4.3.2 FM Input
Parameter Options
Enabled: Yes / No
Name: User denable
Input Trim: ±10dB
Seek Lock: Medium / High.
Sets the FM signal strength required for
the tuner to identify an FM station.
Uniti Setup 1/10
4Language
Inputs
Rooms
Speakers
Select Input 1/16
4CD
FM
DAB
iRadio
CD 1/5
4Enabled: Yes
Name: CD
Input Trim: 0
Auto Select: Yes
Language 1/6
4English
Français
Deutsch
Italiano
FM 4/4
Enabled: Yes
Name: FM
Input Trim: 0
4Seek Lock: Medium