11
W415-0931 / A / 11.04.10
5.3 OPERATING BY REMOTE CONTROL
NOTE: Make certain the batteries are installed correctly and are new.
A. Make certain the appliance’s main power switch is at the ON position.
The remote control will NOT work if the Main Power Switch is at the
OFF position.
B. When operating the remote control, it must be directed towards the
front center of the appliance.
C. The power button can be used to power up or down the appliance
(the main power switch on the appliance must be in the ON position
for the remote to operate). Pressing this button activates the power to
the appliance.
D. To activate the heater, press the function button. Press and release
the function button to cycle through the settings:
• Press the function button once to turn on the fan only.
• Twice to turn on the fan and the 750W heater.
• Three times to turn on the fan and the 1500W heater.
• Four times to turn both the fan and heater off.
E. To adjust the fl ame height and ember bed brightness, press the fl ame
button. There are four brightness levels to cycle through and an off
setting.
F. To turn off the appliance, press the power button once. NOTE: This
remote control must remain within 8 meters or 26 feet of the
appliance to be effective.
To Next Page
Loading...
