W415-0931 / A / 11.04.10
8
Due to the many different fi nish materials used on walls, it is highly recommended that you consult your local
builder before you install this appliance on the wall.
A. Select a location that is not prone to moisture and is located at least 36" away from combustible
materials such as curtain drapes, furniture, bedding, paper, etc.
B. Have two people hold the appliance against the wall to determine the fi nal location.
C. Using the template, mark the center of the hole for both mounting brackets on the fi nish wall. The
distance between the two brackets should be 35.375"
D. Install the anchors and screws supplied. Do not tighten the screws completely as the head of the
screw must engage with the mounting bracket. NOTE: It is strongly recommended that the screws
be screwed into the wall studs where possible. If the wall studs cannot be used, ensure that the
supplied plastic anchors are used.
E. With the screws installed have two people lift the appliance up and insert the screws into the keyholes
on the back of the appliance.
F. Check the appliance for stability ensuring that the appliance will not pull free from the wall.
3.3 INSTALLING THE APPLIANCE
To Next Page
Loading...
