Name: Napoleon LD485RSIB
Brand: Napoleon
Rating: 5 (1 reviews)

Other manuals for Napoleon LD485RSIB

User Manual40 pages

Questions and Answers:

S
Stacey MartinezJul 26, 2025
Why does my Napoleon LD485RSIB Grill have excessive flare-ups and uneven heat?
- E
  Emily HancockJul 26, 2025
  Excessive flare-ups and uneven heat in your Napoleon Grill can occur due to several reasons. Ensure sear plates are installed correctly with the holes facing the front and the slots at the bottom, following the assembly instructions. Improper preheating can also be a cause; preheat the grill with both main burners on high for 10 to 15 minutes. Lastly, excessive grease and ash buildup on the sear plates and in the drip pan can contribute to this issue. Clean the sear plates and drip pan regularly, and avoid lining the pan with aluminum foil. Refer to the cleaning instructions for proper maintenance.
K
Kyle PriceJul 30, 2025
How to fix low heat or low flame on my Napoleon LD485RSIB Grill when the valve is on high?
- B
  Brandon BarryJul 30, 2025
  If your Napoleon Grill has low heat or a low flame when the valve is turned to high, the cause could be one of several things. For propane grills, ensure you are following the correct lighting procedure, with all gas grill valves in the off position when the tank valve is turned on, and turn the tank on slowly to allow pressure to equalize. For natural gas grills, the supply line might be undersized, so the pipe must be sized according to the installation code. For both propane and natural gas grills, improper preheating could be the issue. Preheat the grill with both main burners on high for 10 to 15 minutes.
T
Tammy HermanAug 3, 2025
Why does the 'paint' appear to be peeling inside the lid of my Napoleon Grill?
- T
  Tiffany BradyAug 3, 2025
  The 'peeling paint' inside the lid or hood of your Napoleon Grill is not a defect. The finish on the lid and hood is porcelain and will not peel. The peeling is caused by hardened grease, which dries into paint-like shards that flake off. Regular cleaning will prevent this. See the cleaning instructions for guidance.
H
hallmichelleAug 7, 2025
What to do if the infrared burner on my Napoleon LD485RSIB Grill flashes back?
- H
  Harold TuckerAug 8, 2025
  If the infrared burner on your Napoleon Grill flashes back, turn the burner off and allow it to cool for at least two minutes. Relight the burner and let it burn on high for at least five minutes, or until the ceramic tiles are evenly glowing red. Ensure that objects or accessories cover no more than 75% of the grill surface. If the issue persists, turn the burner off, let it cool for two minutes, and then relight it. After cooling, inspect the burner closely for cracks. If you find any cracks, contact your authorized Napoleon dealer to order a replacement burner assembly. Also, the ceramic tiles may be overloaded with grease drippings and buildup, or the ports may be clogged. Another possible cause is that the burner overheated due to inadequate ventilation.

Napoleon LD485RSIB Specifications

General

Cooking Area	485 sq. in.
Burners	4
Side Burner	Yes
Rotisserie Burner	Yes
Material	Stainless Steel
Dimensions	32.5" H x 49.5" W x 24" D
Fuel Type	Propane
BTU	48, 000 BTUs
Ignition Type	Electronic Ignition