7 Remote control ELT-400
7-8
Measured quantity, evaluation mode
GET:MODE_INFO?[CR]<LF>
Response:
<param>, <text><CR><LF>
Meaning:
Returns the operating mode that is selected.
Note: The length of <text> is limited to 30 characters.
param Explanation
0 “Field strength” mode
1 “Exposure STD” mode
Table 7-4 Operating mode characterization
text Explanation
Additional information:
• End value (RMS value) if param = 0
• Standard’s name and exposure range if param = 1
Table 7-5 Additional information
To Next Page
Loading...
