National Instruments 60 Series Programmer's Manual

Index
PCI E Series RLPM I-2
© National Instruments Corporation
analog input programming examples,
4-8 to 4-31
acquiring one sample from channel 0,
4-9 to 4-12
AMUX-64T
sampling one channel, 4-27 to 4-29
scanning eight channels, 4-29 to 4-31
functions for programming, 4-8
single wire acquisition, 4-25 to 4-26
STC scanning, 4-12 to 4-14
acquiring 20 scans with external start
and stop trigger, 4-23 to 4-25
with DMA, 4-17 to 4-20
with external start trigger and scan
start pulses, 4-21 to 4-22
with interrupts, 4-14 to 4-17
Analog Input Register Group
ADC FIFO Data Register, 3-8
Configuration Memory High Register,
3-11 to 3-15
Configuration Memory Low Register,
3-9 to 3-10
overview, 3-7
register map, 3-2
analog output circuitry
block diagram, 2-20
theory of operation, 2-21 to 2-22
analog output programming examples,
4-31 to 4-44
CPU write to DAC, 4-32 to 4-34
functions for programming, 4-32
waveform generation
with external UPDATE and external
trigger, 4-41 to 4-43
with polled writes, 4-34 to 4-39
using interrupts, 4-43 to 4-44
using local buffer mode, 4-41 to 4-43
Analog Output Register Group
AO Configuration Register, 3-16 to 3-17
DAC FIFO Data Register, 3-18
DAC0 Direct Data Register, 3-19
DAC1 Direct Data Register, 3-20
overview, 3-15
register map, 3-2
analog output timing circuitry, 2-22 to 2-24
single-point output, 2-22 to 2-23
waveform generation, 2-23 to 2-24
analog triggering
programming considerations,
4-52 to 4-56
example, 4-54 to 4-56
trigger structure (figure), 4-54
theory of operation, 2-19 to 2-20
Analog_Trigger_Control function
analog triggering example, 4-55
purpose and use, 4-54
Analog_Trigger_Drive bit, 4-53
AO Configuration Register
description, 3-16 to 3-17
register map, 3-2
AO_Arming function
waveform generation examples
using interrupts, 4-44
using local buffer mode, 4-41
using polled writes, 4-38
AO_Board_Personalize function
CPU write to DAC, 4-33
waveform generation, 4-35
AO_Channels function, 4-37
AO_Counting function
waveform generation examples
using external UPDATE and
trigger, 4-42
using local buffer mode, 4-39
using polled writes, 4-36
AO_Errors_To_Stop_On function, 4-38
AO_FIFO function
generating DMA requests, 4-58
waveform generation examples
using interrupts, 4-43
using local buffer mode, 4-41
using polled writes, 4-38

National Instruments 60 Series Specifications

General

Brand	National Instruments
Model	60 Series
Category	I/O Systems
Language	English