National Instruments 60 Series Programmer's Manual

Chapter 4 Programming
© National Instruments Corporation 4-11 PCI E Series RLPM
8. The function AI_Board_Environmentalize configures the board
for any external multiplexers.
Joint_Reset_Register
AI configuration start = 1;
AI_Mode_2_Register
External mux present = 0;
Joint_Reset_Register
AI configuration start = 0;
AI configuration end = 1;
9. Call
AI_Trigger_Signals to set the triggering options.
Joint_Reset_Register
AI configuration start = 1;
AI_Mode_1_Register
Trigger once = 1;
AI_Trigger_Select_Register
Start edge = 1;
Start sync = 1;
Joint_Reset_Register
AI configuration start = 0;
AI configuration end = 1;
10. The function
AI_Scan_Start selects the scan start event.
Joint_Reset_Register
AI configuration start = 1;
AI_Start_Stop_Select_Register
Start edge = 1;
Start sync = 1;
Joint_Reset_Register
AI configuration start = 0;
AI configuration end = 1;
11. Call the function
AI_End_of_Scan to select the end of scan event.
Joint_Reset_Register
AI configuration start = 1;
AI_Start_Stop_Select_Register
Stop select = 19;
Stop sync = 1;
Joint_Reset_Register
AI configuration start = 0;
AI configuration end = 1;

National Instruments 60 Series Specifications

General

Brand	National Instruments
Model	60 Series
Category	I/O Systems
Language	English