© National Instruments Corporation 1-1 M Series User Manual
1
Getting Started
M Series devices feature up to 80 analog input (AI) channels, up to four
analog output (AO) channels, up to 48 lines of digital input/output (DIO),
and two counters. If you have not already installed your device, refer to the
DAQ Getting Started Guide. For specifications arranged by M Series
device family, refer to the specifications document for your device on
ni.com/manuals.
Before installing your DAQ device, you must install the software you plan
to use with the device.
Installing NI-DAQmx
The DAQ Getting Started Guide, which you can download at
ni.com/manuals, offers NI-DAQmx users step-by-step instructions for
installing software and hardware, configuring channels and tasks, and
getting started developing an application.
Installing Other Software
If you are using other software, refer to the installation instructions that
accompany your software.
Installing the Hardware
The DAQ Getting Started Guide contains non-software-specific
information about how to install PCI, PCI Express, PXI, PXI Express, and
USB devices, as well as accessories and cables.
Device Pinouts
Refer to Appendix A, Device-Specific Information, for M Series device
pinouts.
To Next Page
Loading...
Need help?
General
