National Instruments M Series - Page 407

Index
M Series User Manual I-14 ni.com
signal sources
floating, 4-15
ground-referenced, 4-21
Signal Stream, USB, 10-1
signals
AI Convert Clock, 4-31
AI Convert Clock Timebase, 4-35
AI Hold Complete Event, 4-36
AI Pause Trigger, 4-39
AI Reference Trigger, 4-37
AI Sample Clock, 4-28
AI Sample Clock Timebase, 4-30
AI Start Trigger, 4-36
analog input, 4-25
analog output, 5-7
AO Pause Trigger, 5-8
AO Sample Clock, 5-10
AO Sample Clock Timebase, 5-11
AO Start Trigger, 5-7
Change Detection Event, 6-8
connecting analog input, 4-13
connecting analog output, 5-6
connecting counter, C-3
connecting digital I/O, 6-9
connecting PFI input, 8-4
Counter n A, 7-28
Counter n Aux, 7-28
Counter n B, 7-28
Counter n Gate, 7-27
Counter n HW Arm, 7-29
Counter n Internal Output, 7-29
Counter n Source, 7-26
Counter n TC, 7-29
Counter n Up_Down, 7-29
Counter n Z, 7-28
counters, 7-25
DI Sample Clock, 6-4
DO Sample Clock, 6-5
exporting timing output using PFI
terminals, 8-3
FREQ OUT, 7-30
Frequency Output, 7-30
minimizing output glitches, C-3
output, minimizing glitches on, 5-4
simple pulse generation, 7-19
single
period measurement, 7-6
point edge counting, 7-2
pulse generation, 7-19
retriggerable, 7-21
with start trigger, 7-20
pulse-width measurement, 7-4
semi-period measurement, 7-8
two-signal edge-separation
measurement, 7-18
single-ended connections
for floating signal sources, 4-20
RSE configuration, 4-20
software, 1-1
configuring AI ground-reference
settings, 4-7
NI resources, E-1
programming devices, 2-7
software-timed
acquisitions, 4-11
generations, 5-4
specifications, A-1
device, 1-2
PCI/PCIe/PXI/PXIe-6251, A-68
PCI/PCIe/PXI/PXIe-6259, A-109
PCI/PXI-6220, A-4
PCI/PXI-6221, A-9
PCI/PXI-6224, A-26
PCI/PXI-6225, A-32
PCI/PXI-6229, A-47
PCI/PXI-6250, A-63
PCI/PXI-6254, A-88
PCI/PXI-6255, A-94
PCI/PXI-6280, A-131
PCI/PXI-6281, A-136
PCI/PXI-6284, A-141
PCI/PXI-6289, A-147