© National Instruments | 2-11
RMC-8357 User Manual
CPU C3 Report
Select Enable to allow the BIOS to report the CPU C3 State (ACPI C2) to the operating system.
During the CPU C3 State, the CPU clock generator is turned off. The options are Enable and
Disable.
CPU C6 Report
Select Enable to allow the BIOS to report the CPU C6 state (ACPI C3) to the operating system.
During the CPU C6 state, power to all caches is turned off. The options are Enable and Disable.
Note Available when Power Technology is set to Custom.
Enhanced Halt State (C1E)
Select Enabled to enable "Enhanced Halt State" support, which will significantly reduce the
CPU's power consumption by minimizing CPU's clock cycles and voltage use during a "Halt
State." The options are Disable and Enable.
CPU T State Control
ACPI (Advanced Configuration Power Interface) T-States
If this item is set to Enable, CPU throttling will be supported by the operating system to reduce
power consumption. The options are Enable and Disable.
Socket RAPL (Running Average Power Limit)
Configuration
FAST-RAPL-NSTRIKE-PL2
-
DUTY-CYCLE
This feature displays the value of the item above within the range between 25 (10%) and
64 (25%).
Turbo Power Limit Lock
Select Enable to set the power use limit for the machine when it is running in the turbo mode.
The options are Enable and Disable.
Long Power Limit Override
Select Enable to support long-term power limit override. If this feature is disabled, BIOS will
set the default value. The options are Enable and Disable.
Long Duration Power Limit
This item displays the power limit set by the user during which long duration power is
maintained. The default setting is 0.
To Next Page
Loading...
Need help?
General
