EasyManuals Logo

National Instruments SCB-68 User Manual

National Instruments SCB-68
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
Chapter A Specifications
SCB-68 Shielded Connector Block User Manual A-2 ni.com
Voltage rating .........................................250 V
Nominal resistance .................................0.195
Physical
Box dimensions (including box feet)......19.5 by 15.2 by 4.5 cm
(7.7 by 6.0 by 1.8 in.)
I/O connectors.........................................One 68-pin male SCSI connector
Screw terminals ......................................68
Wire gauge..............................................≤26 AWG
Resistor sockets ......................................0.032 to 0.038 in. (in diameter)
Maximum Working Voltage
Maximum working voltage refers to the signal voltage plus the
common-mode voltage.
Channel-to-earth .....................................42 V
rms
, Installation Category II
Channel-to-channel.................................42 V
rms
, Installation Category II
Environmental
Operating temperature ............................0 to 70 °C
Storage temperature ................................20 to 70 °C
Humidity.................................................5 to 90% RH, noncondensing
Maximum altitude...................................2000 meters
Pollution Degree (indoor use only) ........II

Table of Contents

Other manuals for National Instruments SCB-68

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the National Instruments SCB-68 and is the answer not in the manual?

National Instruments SCB-68 Specifications

General IconGeneral
BrandNational Instruments
ModelSCB-68
CategoryCables and connectors
LanguageEnglish

Related product manuals