National Instruments SCXI Series - Table 2-1. Digital Signal Connections, Jumper Settings

Chapter 2 Configuration and Installation
© National Instruments Corporation 2-7 SCXI-1120/D User Manual
Table 2-1. Digital Signal Connections, Jumper Settings
Jumper Description Configuration
W42 Position 1—Connects pullup
to SERDATOUT
(factory-default setting).
Applies only to SCXI-1120
Revisions C or later and all
SCXI-1120D modules.
W42 Position 3—Parking position
(not connected on Revisions A
and B of the SCXI-1120).
W43 Position 1—Connects MISO
to SERDATOUT
(factory-default setting).
W43 Position 3—Parking position
1
2
3
1
2
3
1
2
3
1
2
3