National Instruments SCXI Series - Index

© National Instruments Corporation I-1 SCXI-1120/D User Manual
Index
Numbers
+5V signal (table), 3-4
A
AC-coupled signal connections (figure)
SCXI-1120, 3-6
SCXI-1120D, 3-7
analog and timing circuitry, 4-5 to 4-11
analog input block diagram, 4-6
analog output circuitry, 4-9 to 4-11
formula for gain determination, 4-7
analog configuration, 2-8 to 2-13
direct temperature connection, 2-10
gain jumpers, 2-10 to 2-12
grounding, shielding, and reference-mode
selection, 2-8 to 2-9
jumper W41 (table), 2-10
jumper W46, 2-8 to 2-9
SCXI-1120 filter jumpers, 2-12 to 2-13
SCXI-1120/D filter jumpers, 2-13
analog input channels, 3-5 to 3-7
analog input block diagram, 4-6
SCXI-1120
AC-coupled signal connections
(figure), 3-6
description, 3-6 to 3-7
floating AC-coupled signal connections
(figure), 3-6
SCXI-1120D
AC-coupled signal connections
(figure), 3-7
description, 3-7
floating AC-coupled signal connections
(figure), 3-7
SCXI-1120/D
description, 3-5
floating signal connections referenced
to chassis ground (figure), 3-5
ground-referenced signal connections
(figure), 3-5
analog input specifications
SCXI-1120, A-1 to A-4
SCXI-1120/D, A-5 to A-7
amplifier characteristics, A-6
dynamic characteristics, A-6 to A-7
filter, A-7
input characteristics, A-5
stability, A-7
transfer characteristics, A-6
analog output circuitry, 4-9 to 4-11
diagram, 4-9
multiplexed mode, 4-10 to 4-11
parallel mode, 4-10
analog output signal connections, 3-10 to 3-11
AOGND signal (table), 3-9
C
calibration, 5-1 to 5-2
equipment requirements, 5-1
offset null adjust, 5-1 to 5-2
potentiometer reference designators
(table), 5-2
CH7+ through CH0+ signals (table), 3-4
CH7- through CH0- signals (table), 3-4
CHSGND signal (table), 3-4
ComponentWorks software, 1-3