EasyManuals Logo

Native Instruments AUDIO 8 DJ User Manual

Native Instruments AUDIO 8 DJ
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background image
AUDIO 8 DJ – 18
6.1 Back view and connections
IN 1|2 – OUT 1|2 (CH A): Connect the male XLR part of the multicore cABle to
control Deck A here.
IN 3|4 – OUT 3|4 (CH B): Connect the male XLR part of the multicore cABle
to control Deck B here.
OUT 5|6 (CH C): Connect to auxiliary input of your mixer when using the send
effects.
OUT 7|8 (CH D): Connect to auxiliary input of your mixer when using the send
effects.
USB: Connect the AUDIO 8 DJ to your computer via USB 2.0 here.
USB Security Hook: Wrap your USB cable around this to prevent accidental
disconnection.
MIDI IN/ OUT: Connect your MIDI device here.
GROUND: If connecting the turntable grounds to the mixer gives unsatisfac-
tory results, ground your turntables here.
!
IN 1|2 and IN 3|4 have
phono input levels, while
all other inputs are line level.
!
IN 1|2 and IN 3|4 have
phono input levels, while
all other inputs are line level.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Native Instruments AUDIO 8 DJ and is the answer not in the manual?

Native Instruments AUDIO 8 DJ Specifications

General IconGeneral
Number of Inputs8
Number of Outputs8
Headphone Output1 x 1/4" TRS
USBUSB 2.0
Bit Depth24-bit
Power SupplyUSB Powered
Signal-to-Noise Ratio> 100 dB
Frequency Response20 Hz - 20 kHz
CompatibilityWindows, macOS
Audio Interface TypeUSB
Audio Inputs4 x RCA
Audio Outputs4 x RCA
Phono Inputs4 (switchable with line inputs)
Digital OutputsS/PDIF
MIDI I/OIn/Out
Sample Rate44.1 kHz, 48 kHz, 96 kHz

Related product manuals