Native Instruments AUDIO 8 DJ User Manual

AUDIO 8 DJ – 33
Make sure the volume controls of the amplier are completely turned down!
In the Settings Tool or on the AUDIO 8 DJ, choose phoNo as iNput moDe.
Connect the RCA cable of your turntable to the input pair of channel A or B of
the AUDIO 8 DJ, e.g. AuDio 8 DJ (ch. A, iN 1|2).
Put a record on your turntable and start playing it.
8.4 Using a CD-Player and a turntable side-by-side
If you plan to use a CD-Player and a (Phono Level) turntable side-by-side, you
have to:
leave the turntable connected to channel A (In 1|2) with iNput moDe on phoNo
and
plug the RCA cable of the CD-Player into channel c (i N 5|6) or D (i N 7|8), since
these provide line level amplication anyway.
8.5 Using the AUDIO 8 DJ with a MIDI device
The AUDIO 8 DJ provides one MIDI input and one MIDI output. To use the AUDIO
8 DJ’s MIDI interface:
Connect the MIDI Out of your MIDI device to the AUDIO 8 DJ’s miDi iN socket.
Connect the MIDI In of your MIDI device to the AUDIO 8 DJ’s miDi out socket.
In your desired MIDI application, choose the AUDIO 8 DJ miDi iN and out.
►
►
►
►
►
►
►
►
►
%
Nowadays, there are also
linve level turntables on
the market. Use these in timecoDe
cD/ liNe mode in channels A (iN
1|2) and B (3|4). They can also
be used on every other input of
the AUDIO 8 DJ.
%
Nowadays, there are also
linve level turntables on
the market. Use these in timecoDe
cD/ liNe mode in channels A (iN
1|2) and B (3|4). They can also
be used on every other input of
the AUDIO 8 DJ.

Native Instruments AUDIO 8 DJ Specifications

General

Brand	Native Instruments
Model	AUDIO 8 DJ
Category	Recording Equipment
Language	English