Nautilus E626 Service Manual

62
C
3. Loosen and remove the thin Nut from the Power Inlet (C) on the
outside of the Shroud.
4. Pull the Power Inlet plug (C) out of the hole toward the inside of the
Shroud. Discard the old Power Inlet assembly.
5. Installation is the reverse procedure.
NOTICE: Do not crimp any cables. Be sure the Power Inlet plug is
seated evenly in the hole.
6. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner’s Manual.
C
A
C
A

Nautilus E626 Specifications

General

Bottle holder	Yes
Product color	Black, Grey
Number of programs	29
Maximum user weight	136 kg
Number of resistors	25
Training displayed parameters	Calories, Distance, Time