19
NOTICE: Be sure not to crimp any cables.
U614/R614 bikes—To reinstall the Pedals, carefully align the threads
and hand tighten to prevent cross-threading. Then tighten fully with pedal
wrench.
Note: The Left Pedal is reverse-threaded. Orientation is based
from a seated position on the bike. The Left Pedal has an “L”,
the Right Pedal an “R”.
16. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
!
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner’s Manual.
To Next Page
Loading...
Need help?
General
