What to do if the incline assembly sticks on my Nautilus Schwinn 470?
If the incline assembly sticks or is difficult to adjust on your Nautilus Elliptical Trainer, adjust the levelers to raise the front of the rail assembly until there is 0.6 cm - 1.25 cm (1/4 in - 1/2 in) space between the top of the incline assembly and the main unit shroud.
Why is my Nautilus Schwinn 470 Elliptical Trainer not turning on?
Your Nautilus Elliptical Trainer may not be turning on due to several reasons. First, ensure the unit is plugged into a functioning wall outlet. Check that the connection is secure and undamaged, replacing the adapter or connection if necessary. Turn on the power with the power switch. Inspect the cable for any crimped or cut wires, and replace it if damaged. Make sure the cable is securely connected and properly oriented, with the small latch on the connector lined up and snapped into place. Also, check the console display for cracks or damage; replace the console if damaged.
What to do if the resistance does not change on my Nautilus Elliptical Trainer?
If the resistance on your Nautilus Elliptical Trainer isn't changing, start by checking the console for any visual damage and replace it if damaged. Inspect the cable for crimped or cut wires and replace it if necessary. Ensure the cable is securely connected and properly oriented, reseating all connections and making sure the small latch on the connector lines up and snaps into place. If the magnets move, adjust them to the proper range. If they don't, replace the Servo Motor. Also, replace the MCB.
What to do if my Nautilus Elliptical Trainer displays 'Please Stride'?
If your Nautilus Elliptical Trainer console displays a 'Please Stride' error, it indicates there's no speed/RPM reading. Check the cable for any cut or crimped wires, and replace it if necessary. Ensure the cable is securely connected and oriented properly, making sure the small latch on the connector lines up and snaps into place. Verify the magnet is in place on the pulley. Also, check that the speed sensor is aligned with the magnet and connected to the data cable; realign or replace the sensor if damaged.
Why is the telemetric heart rate not displayed on my Nautilus Schwinn 470 Elliptical Trainer?
If the telemetric heart rate is not displayed on your Nautilus Elliptical Trainer, ensure the strap is 'POLAR®' compatible and uncoded. Make sure the strap is directly against the skin and the contact area is wet. If the strap has replaceable batteries, install new batteries. Select the EDIT USER PROFILE option for the user profile. Go to the WIRELESS HR setting and make sure that the current value is set to ON. Try moving the unit away from sources of interference such as a TV or microwave. If the interference is eliminated and the heart rate still does not function, replace the strap. If the heart rate still does not function, replace the console.
How to fix incline that won't adjust on Nautilus Schwinn 470 Elliptical Trainer?
If the incline on your Nautilus Elliptical Trainer isn't adjusting, check the console for any visual damage and replace it if damaged. Inspect the cables for cut or crimped wires, replacing them if necessary. Ensure the Incline Adjuster Assembly is attached to the Incline Motor drive screw.
How to fix a squeaking noise on Nautilus Schwinn 470?
To address a squeaking noise that appears a few minutes into your workout on the Nautilus Elliptical Trainer: Loosen the pivot rod bolt slightly until the noise goes away. White lithium grease can also be applied for a temporary fix. Apply silicone lubricant to a dry cloth and wipe the rails to eliminate roller noise.
Why does my Nautilus Schwinn 470 rock or not sit level?
If your Nautilus Elliptical Trainer rocks or doesn't sit level, adjust the levelers until the machine is level. If the surface is extremely uneven, the adjustment may not compensate, so move the machine to a more level area.
What to do if contact HR is not displayed on Nautilus Schwinn 470 Elliptical Trainer?
If 'Contact HR' is not displayed on your Nautilus Elliptical Trainer, ensure the cable is securely connected to the console. Also, be sure the cables from the handlebars and the cable to the console are secure and undamaged. Make sure your hands are centered on the HR sensors, kept still, and applying relatively equal pressure to each side. A conductive electrode cream can help improve contact. If these steps don't work, the static handlebar should be replaced.
How to fix foot pedals that feel loose on Nautilus Schwinn 470?
If the foot pedals on your Nautilus Elliptical Trainer feel loose, tightly secure all hardware on the Pedal Arms and Handlebar Arms.
General| Brand | Nautilus |
|---|---|
| Model | Schwinn 470 |
| Category | Elliptical Trainer |
| Language | English |
Details on safety warning labels and the machine's serial number identification.
Provides essential information on how to properly ground the equipment for electrical safety.
Guidance on preparing the workspace and following assembly tips before starting the setup.
Instructions for attaching the front stabilizer component to the main frame.
Details on connecting the rail assembly to the machine's frame.
Steps for connecting console cables and mounting the console mast.
Procedure for attaching the left and right leg components to the frame.
Guide to attaching the arm pivot rod and lower handlebar arms.
Instructions for attaching the left and right foot pedals to the machine.
Steps for securing and adjusting the upper handlebar arms.
Procedure for installing the handlebar shrouds for a finished look.
Guide to routing cables and attaching the static handlebar.
Instructions for attaching the water bottle holder accessory.
Steps to connect console cables and securely attach the console unit.
Connects the power cord and guides through a final inspection of the assembled machine.
Instructions on how to safely move the assembled elliptical machine using its transport features.
Guide to adjusting the machine's levelers for stability on uneven surfaces.
Overview of the console's display, buttons, and overall functionality.
Explains the information shown in the upper portion of the console display.
Details on how the program display shows workout progress and profile.
Information on intensity and heart rate zone displays for workout feedback.
Explains the goal and user profile display areas on the console.
Details on the workout values and metrics displayed on the lower console screen.
Explains how to use remote and contact sensors for heart rate monitoring.
Information on how maximum heart rate and recovery scores are calculated.
Guideline graph for target heart rates based on age for optimal fat burning.
Instructions on how to safely get on and off the elliptical machine.
Details on the machine's power-up, idle, and automatic sleep modes.
Guide to setting up the console with date, time, and measurement units.
Instructions for starting and performing a basic manual workout.
Information on creating and managing user profiles for personalized workouts.
Steps to edit and customize individual user profile settings.
Procedure for resetting a user profile to default settings.
How to change resistance levels and incline angles during workouts.
Overview of the various pre-programmed workout routines available.
Guide to selecting profile programs and setting workout goals.
Details on performing the fitness test to measure physical improvement.
Instructions for the recovery test to assess post-exercise heart rate recovery.
How to use programs that control workouts based on target heart rate zones.
Guide to creating and using personalized workout programs.
Instructions on how to switch workout programs while exercising.
How to pause, continue, or end a workout session.
Details on viewing workout results and the cool down period.
Diagrams and lists of parts used for machine maintenance.
To Next Page
