How to fix Nautilus Elliptical Trainer results not posting to MyFitnessPal?
If your workout results are not posting from the Nautilus Trainer™ App to your MyFitnessPal® account or Under Armour® Connected Fitness: * From the Menu icon on the Nautilus Trainer™ App, select the Sync to MyFitnessPal® or Under Armour® Connected Fitness option. * Review your account and password for MyFitnessPal® / Under Armour® Connected Fitness.
What to do if console continuously cycles through program screens on Nautilus Elliptical Trainer?
Hold down the PAUSE/END button and Left button together for 3 seconds.
How to fix squeaking noise on Nautilus Elliptical Trainer?
To address a squeaking noise that appears a few minutes into a workout and gets progressively worse on your Nautilus Elliptical Trainer: * Loosen the pivot rod bolt slightly until the noise goes away. White lithium grease can also be applied for a temporary fix. * Apply silicone lubricant to a dry cloth and wipe the rails to eliminate roller noise.
How to fix knocking sound during machine operation on Nautilus Elliptical Trainer?
Make sure that the alignment tab on the Pivot Sleeve goes into the slot in the hole. Be sure the Pivot Sleeve extends through the opposite hole in the joint cover.
How to fix clicking noise on Nautilus Elliptical Trainer?
To troubleshoot a drive train click or tick noise that occurs once per full crank revolution on your Nautilus Elliptical Trainer: * Disconnect the left and right foot assemblies and rotate the crank. If the sound persists, replace the crank/pulley assembly. If the sound does not come from the rotating crank, check the foot assemblies and upper/lower handlebars. * Manually move the foot, leg, and handlebar assemblies to isolate the sound. Replace the part making the sound. * Tightly secure all hardware on the Stabilizers and the base of the Console Mast.
How to fix loose foot pedals on Nautilus Elliptical Trainer?
To address loose foot pedals or difficult operation on your Nautilus Elliptical Trainer, tightly secure all hardware on the Pedal Arms and Handlebar Arms.
How to level a Nautilus Elliptical Trainer?
If your Nautilus Elliptical Trainer rocks or does not sit level: * Adjust the levelers until the machine is level. * If the surface is extremely uneven, adjustment may not be enough. Move the machine to a level area.
Why is the fan not turning on but console operates on my Nautilus Elliptical Trainer?
Unplug the Nautilus Elliptical Trainer from the electrical outlet for 5 minutes. Remove any material from the fan. If necessary, detach the Console to help with removal. Replace the Console if unable to remove blockage.
Why does my Nautilus Elliptical Trainer say 'Please Stride'?
If your Nautilus Elliptical Trainer displays a “Please Stride” error code and shows no speed/RPM reading: * Inspect the cable for any cut or crimped wires and replace the cable if necessary. * Ensure the cable is securely connected and oriented properly, making sure the small latch on the connector lines up and snaps into place.
What to do if my Nautilus Elliptical Trainer workout results will not sync with Bluetooth device?
If your Nautilus Elliptical Trainer workout results aren't syncing with your Bluetooth® enabled device: * Ensure the machine is in Idle Mode by pressing the PAUSE/END button until the Power-Up Mode screen appears. * Verify that the workout lasted longer than 1 minute, as shorter workouts are not saved or posted. * Unplug the unit from the electrical outlet for 5 minutes, then reconnect it. * Confirm that Bluetooth® is enabled on your device. * Check the Fitness App specifications to ensure your device is compatible.
Key safety precautions and warnings for operation and assembly, including ADANGER notices.
Information on safety labels and identifying the product's serial number.
Proper electrical grounding procedures and guidance on using surge protector devices.
Technical specifications, dimensions, and power requirements of the equipment.
Essential preparation steps and basic tips before starting the assembly process.
Detailed list identifying all included parts with corresponding item numbers.
Listing of all hardware components and necessary tools for assembly.
Instructions for attaching the front stabilizer to the machine frame.
Connecting the rail assembly to the main frame.
Connecting electrical cables and attaching the console mast.
Securing the machine's legs to the frame assembly.
Mounting the water bottle holder onto the console mast.
Installing the arm pivot rod and handlebar arm components.
Attaching the pedals to the leg and handlebar arm assemblies.
Securing the upper handlebar arms to the main frame.
Removing pre-installed hardware from the console unit.
Connecting console cables and attaching the static handlebar.
Connecting cables and mounting the static handlebar assembly.
Installing the console junction cover for a clean finish.
Connecting console mast cables and attaching rear handlebar shrouds.
Attaching the front handlebar shrouds and securing with screws.
Connecting the main power cord to the equipment frame.
Performing a final check of assembly and hardware tightness.
Procedures for safely moving the fitness equipment before use.
Steps to level the machine for optimal performance and safety.
Identification and description of major machine components.
Overview of console display elements and keypad button functions.
Explanation of the upper and lower display data and heart rate zones.
Detailed explanation of displayed workout metrics like speed, time, and calories.
Using Bluetooth to sync workouts with the Nautilus Trainer™ app.
Information on USB charging and how to use the heart rate chest strap.
How to use remote and contact heart rate sensors for monitoring.
Understanding target heart rate zones and controls for resistance/incline.
Guidelines for wearing, exercising, adjusting pedals, and mounting/dismounting.
Initial console setup, including date, time, and measurement units.
Creating, selecting, and editing user profiles for personalized workouts.
How to change resistance levels and incline angles during workouts.
Description of various pre-programmed workouts organized by category.
Creating custom workouts and using power training programs.
Features like pausing, stopping, and changing programs during a workout.
Viewing workout results, cool-down, and goal track statistics.
Understanding BMI calculation and saving workout statistics to USB.
Adjusting date, time, measurement units, and sound settings on the console.
Daily, weekly, and monthly maintenance tasks for the machine.
Instructions for replacing the battery in the heart rate chest strap.
Identification of various parts used for maintenance.
Solutions for problems related to the unit not turning on or display issues.
Troubleshooting contact and telemetric heart rate display issues.
Solutions for issues with speed, resistance, or incline adjustments.
Addressing problems with the fan, operational noises, and Bluetooth syncing.
General| Brand | Nautilus |
|---|---|
| Model | E628 |
| Category | Elliptical Trainer |
| Language | English |
To Next Page
