Nautilus E628 - Step 15: Connect Power Cord; Step 16: Final Inspection

22
15. Connect the Power Cord to Frame Assembly
Connect this machine to a properly earthed outlet only (see Earthing Instructions).
16. Final Inspection
Inspect your machine to ensure that all hardware is tight and components are properly assembled.
Note: Remove the plastic scratch guard strips from Rails. Apply silicone lubricant to a cloth and
wipe the Rails to eliminate roller noise.
Silicone lubricant is not intended for human consumption. Keep out of reach of children. Store in a safe
place.
Besuretorecordtheserialnumberintheeldprovidedatthefrontofthismanual.
Do not use until the machine has been fully assembled and inspected for correct performance in
accordance with the Owner’s Manual.
25
26