Nautilus E628 User Manual

7
SPECIFICATIONS
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard,levelsurface.Allowaworkoutareaofaminimum1.9mx3m(76”x121”).Besurethattheworkoutspaceyouare
utilizinghasadequateheightclearance,takingintoconsiderationtheheightoftheuserandthemaximumheightofthe
pedals with the incline fully engaged.
Basic Assembly Tips
Follow these basic points when you assemble your machine:
• Read and understand the “Important
Safety Instructions” before assembly.
• Collect all the pieces necessary for
each assembly step.
• Using the recommended wrenches,
turn the bolts and nuts to the right
(clockwise) to tighten, and the left
(counterclockwise) to loosen, unless
instructed otherwise.
• When attaching 2 pieces, lightly lift
and look through the bolt holes to
help insert the bolt through the holes.
• The assembly can require 2 people.
Maximum User Weight: 158.8 kg (350 lbs.)
Total Surface Area (footprint) of equipment: 12707cm2
Maximum Pedal Height - with full incline: 28”(72cm)
Machine Weight:   95.1kg(209.7lbs.)
Power Requirements:
Operating Voltage: 220V - 240V AC, 50/60Hz
Operating Current: 2 A
Heart Rate Chest Strap: 1 CR2032 battery
170 cm
(66.9”)
185.5 cm
(73”)
68.5 cm
(27”)
DO NOT dispose of this product as refuse. This product is to be recycled. For proper disposal of this product,
please follow the prescribed methods at an approved waste center.
3m ( 119.5” )
1.9m
( 74.7” )
0.6m
( 24” )
0.6m
( 24” )
0.6m
( 24” )
0.6m
( 24” )

Nautilus E628 Specifications

General

Brand	Nautilus
Model	E628
Category	Elliptical Trainer
Language	English