Nautilus E628 User Manual

24
Leveling the Machine
ThemachineneedstobeleveledifyourworkoutareaisunevenoriftheRailAssemblyisslightlyofftheoor.Toadjust:
1. Place the machine in your workout area.
2. SafelystandonthebackoftheRailAssemblyforapproximately20seconds.
3. Step off the machine.
4. Loosenthelockingnutsandadjustthelevelersuntiltheyallcontacttheoor.
Do not adjust the levelers to such a height that they detach or unscrew from the machine. Injury to you or
damage to the machine can occur.
5. Adjust until the machine is level. Tighten the locking nuts.
Makesurethemachineislevelandstablebeforeyouexercise.

Nautilus E628 Specifications

General

Brand	Nautilus
Model	E628
Category	Elliptical Trainer
Language	English