To Next Page

To Previous Page

8. The Console display shows the EDIT LOWER DISPLAY prompt. This option allows you to customize which Workout

Values are displayed during a workout.

 TheLowerDisplaywillshowalloftheworkoutvalues,withtheactiveWorkoutValueashing.TheUpperDisplay

shows the active value setting: “ON” or “OFF”. Push the Increase() or Decrease() buttons to hide the active

workout value, and push the Left() or Right() buttons to shift the active workout value.

Note: to show a hidden workout value, repeat procedure and change Upper Display value to “ON” for that value.

When done with customizing the Lower Display, push the OK button to set it.

9. The Console will go to the Power-Up Mode screen with the user selected.

Reset a User Profile

1. From the Power-Up Mode screen, push the User button toselectoneoftheUserProles.

2. Push the OK button to select it.

3. The Console display shows the current User Profile name and the EDIT prompt. Push the Increase() or Decrease()

buttons to change the prompt.

Note: ToexittheEditUserProleoption,pushthePAUSE/ENDbuttonandtheconsolewillgobacktothePower-Up

Mode screen.

4. The Console display shows the RESET prompt and the current User Profile name. Push OK to start the Reset User

Proleoption.

5. The Console will now confirm the request to reset the User profile (the default selection is ‘NO’). Push the Increase()

or Decrease() buttons to adjust the selection.

6. Push OK to make your selection.

7. TheConsolewillgotothePower-UpModescreen.

Changing Resistance Levels

Push the Resistance Level Increase() or Decrease() buttons to change the resistance level at any time in a workout

program. To rapidly change the resistance level, push the desired Resistance Level Quick Button. The Console will adjust

to the selected resistance level of the quick button.

Changing Incline Levels

Push the Incline Level Increase() or Decrease() buttons to change the incline angle

of the rail assembly at any time in a workout program. To rapidly change the incline

level, push the desired Incline Level Quick Button. The Console will adjust to the se-

lected incline level of the quick button.

Be sure the area below the machine is clear before lowering. Fully lower the

Incline Assembly after each workout.

Exercise on this machine requires coordination and balance. Be sure to

anticipate that changes in speed, incline angle and resistance level can

occur during workouts, and be attentive in order to avoid loss of balance

and possible injury.

Note: Be sure that the workout space you are utilizing has adequate height

clearance,takingintoconsiderationtheheightoftheuserandthemaximumincline

oftheellipticalmachine.Thoughtheinclineanglechangestheexercisemotion,itdoesnotaffectthecalorievalues.

Nautilus E628 User Manual

Questions and Answers: