Nautilus E628 - User Manual

Questions and Answers

U
uthompsonSep 2, 2025
How to fix Nautilus Elliptical Trainer Telemetric HR not displayed?
- S
  Samuel SmithSep 2, 2025
  If your Nautilus Elliptical Trainer operates but does not display Telemetric HR: * Ensure the strap is "POLAR®" compatible and uncoded. Make sure the strap is directly against the skin and the contact area is wet. * If the strap has replaceable batteries, install new batteries. * Select the Edit User Profile option and ensure the WIRELESS HR setting is set to ON. * Try moving the unit away from sources of interference like TVs or microwaves. * If eliminating interference doesn't work, replace the strap. * If the HR still doesn't function, replace the Console.
J
Jennifer ClarkAug 31, 2025
How to fix incline that won't adjust on Nautilus Elliptical Trainer?
- S
  Steven JohnsonAug 31, 2025
  If the incline on your Nautilus Elliptical Trainer does not adjust: * Check the console for visual signs of damage and replace it if necessary. * Ensure the cable from the right Upper Handlebar and cables to the Console are secure and undamaged. * Inspect all wires in the cables for cuts or crimps, replacing the cable if necessary. * Be sure the Incline Adjuster Assembly is attached to the Incline Motor drive screw.
R
Robert MuellerAug 29, 2025
What to do if my Nautilus Elliptical Trainer does not display Contact HR?
- K
  Kenneth RodriguezAug 29, 2025
  If your Nautilus Elliptical Trainer is operating, but does not display Contact HR: * Ensure the cable is securely connected to the Console. * Verify that the cables from the handlebars and the cable to the Console are secure and undamaged. * Make sure your hands are centered on the HR sensors, kept still, and applying relatively equal pressure to each side. * Consider using a conductive electrode cream (heart rate cream) to improve conduction. These are available online or at medical and some fitness stores. * If these steps don't resolve the issue, the Static Handlebar may need to be replaced.
J
Jack BurkeAug 27, 2025
Why is my Nautilus Elliptical Trainer fan not working?
- Y
  ybridgesAug 28, 2025
  If the fan on your Nautilus Elliptical Trainer will not turn on or off: * Inspect the cable for cut or crimped wires and replace it if necessary. * Ensure the cable is securely connected and properly oriented, making sure the small latch on the connector lines up and snaps into place. * Unplug the unit from the electrical outlet for 3 minutes, then reconnect it.
M
Monica LesterAug 26, 2025
How to fix resistance on my Nautilus Elliptical Trainer?
- J
  Jerry SimonAug 27, 2025
  If the resistance on your Nautilus Elliptical Trainer isn't changing: * Check the console for visual signs of damage and replace it if necessary. * Inspect the cable for crimped or cut wires and replace the cable if needed. * Ensure the cable is securely connected and properly oriented, reseating all connections and ensuring the small latch on the connector lines up and snaps into place. * Check the cable from the left Upper Handlebar and cables to the Console to make sure they are secure and undamaged. * Replace MCB.
C
Christopher ThompsonAug 25, 2025
What to do if the console shuts off during use on my Nautilus Elliptical Trainer?
- M
  Melissa McclureAug 25, 2025
  If the console on your Nautilus Elliptical Trainer shuts off (enters sleep mode) while you are using it: * Make sure the unit is plugged into a functioning wall outlet. * Check the power connection for damage and replace the adapter or connection if needed. * Inspect the cable for cuts or crimps and replace it if necessary. * Ensure the cable is securely connected and properly oriented, with the small latch on the connector lined up and snapped into place. * Unplug the unit from the electrical outlet for 3 minutes, then reconnect it. * Verify that the magnets are in place on the pulley. * Ensure the speed sensor is aligned with the magnet and connected to the data cable. Realign or replace if damaged.
A
Austin BrewerAug 22, 2025
Why won't my Nautilus Elliptical Trainer turn on?
- P
  Peggy WernerAug 22, 2025
  If your Nautilus Elliptical Trainer isn't turning on, consider these possible solutions: * Ensure the unit is plugged into a functioning wall outlet. * Check the power cord and connection at the unit for damage; replace if necessary. * Turn on the power using the Power Switch. * Inspect the cable for any visible crimps or cuts; replace the cable if damaged. * Ensure the cable is securely connected and properly oriented, with the small latch on the connector lined up and snapped into place. * Check the console display for cracks or damage and replace the console if needed. * If the console has a partial display and all connections are secure, replace the console.

Summary

Important Safety Instructions

General Safety Precautions

Key safety precautions and warnings for operation and assembly, including ADANGER notices.

Safety Warning Labels and Serial Number

Warning Labels and Product Identification

Information on safety labels and identifying the product's serial number.

Earthing and Electrical Safety

Electrical Grounding and Surge Protection Guidelines

Proper electrical grounding procedures and guidance on using surge protector devices.

Specifications and Pre-Assembly

Machine Specifications and Dimensions

Technical specifications, dimensions, and power requirements of the equipment.

Assembly Preparation and Tips

Essential preparation steps and basic tips before starting the assembly process.

Component Identification

Parts List Overview

Detailed list identifying all included parts with corresponding item numbers.

Assembly Hardware and Tools

Hardware and Tool Requirements

Listing of all hardware components and necessary tools for assembly.

Assembly Guide

Step 1: Attach Front Stabilizer

Instructions for attaching the front stabilizer to the machine frame.

Step 2: Attach Rail Assembly

Connecting the rail assembly to the main frame.

Step 3: Connect Cables and Console Mast

Connecting electrical cables and attaching the console mast.

Step 4: Attach Legs to Frame

Securing the machine's legs to the frame assembly.

Step 5: Install Water Bottle Holder

Mounting the water bottle holder onto the console mast.

Step 6: Install Arm Pivot Rod & Handlebars

Installing the arm pivot rod and handlebar arm components.

Step 7: Attach Pedals to Legs

Attaching the pedals to the leg and handlebar arm assemblies.

Step 8: Attach Upper Handlebar Arms

Securing the upper handlebar arms to the main frame.

Step 9: Remove Console Hardware

Removing pre-installed hardware from the console unit.

Step 10: Route Cables & Attach Static Handlebar

Connecting console cables and attaching the static handlebar.

Step 11: Connect Cables & Install Static Handlebar

Connecting cables and mounting the static handlebar assembly.

Step 12: Attach Console Junction Cover

Installing the console junction cover for a clean finish.

Step 13: Connect Cables & Attach Rear Shrouds

Connecting console mast cables and attaching rear handlebar shrouds.

Step 14: Attach Front Handlebar Shrouds

Attaching the front handlebar shrouds and securing with screws.

Step 15: Connect Power Cord

Connecting the main power cord to the equipment frame.

Step 16: Final Inspection

Performing a final check of assembly and hardware tightness.

Getting Started

Moving the Machine Safely

Procedures for safely moving the fitness equipment before use.

Machine Leveling

Ensuring Proper Machine Stability

Steps to level the machine for optimal performance and safety.

Equipment Features Overview

Key Components Identification

Identification and description of major machine components.

Console Operation and Display

Console Features and Keypad Functions

Overview of console display elements and keypad button functions.

Nautilus Dual Track Display Details

Explanation of the upper and lower display data and heart rate zones.

Workout Data Fields Explanation

Detailed explanation of displayed workout metrics like speed, time, and calories.

Connectivity and Heart Rate Monitoring

Bluetooth Connectivity and Fitness App

Using Bluetooth to sync workouts with the Nautilus Trainer™ app.

USB Charging and Chest Strap Usage

Information on USB charging and how to use the heart rate chest strap.

Heart Rate Monitoring Details

Heart Rate Sensor Operation

How to use remote and contact heart rate sensors for monitoring.

Target Heart Rate Zones and Controls

Understanding target heart rate zones and controls for resistance/incline.

Machine Operations and User Management

General Operations and Setup

Guidelines for wearing, exercising, adjusting pedals, and mounting/dismounting.

Console Power-Up and Initial Setup

Initial console setup, including date, time, and measurement units.

User Profile Management

Creating, selecting, and editing user profiles for personalized workouts.

Adjusting Resistance and Incline Levels

How to change resistance levels and incline angles during workouts.

Workout Programs and Tracking

Profile Programs Overview

Description of various pre-programmed workouts organized by category.

Custom and Power Training Programs

Creating custom workouts and using power training programs.

Workout Program Controls

Features like pausing, stopping, and changing programs during a workout.

Workout Results and Goal Tracking

Viewing workout results, cool-down, and goal track statistics.

BMI Measurement and Data Saving

Understanding BMI calculation and saving workout statistics to USB.

Console Setup and Configuration

Configuring Console Settings

Adjusting date, time, measurement units, and sound settings on the console.

Equipment Maintenance

Routine Maintenance Procedures

Daily, weekly, and monthly maintenance tasks for the machine.

Heart Rate Chest Strap Battery Replacement

Instructions for replacing the battery in the heart rate chest strap.

Maintenance Parts Identification

Identification of various parts used for maintenance.

Troubleshooting Common Issues

Display and Power Issues

Solutions for problems related to the unit not turning on or display issues.

Heart Rate Monitoring Problems

Troubleshooting contact and telemetric heart rate display issues.

Speed, Resistance, and Incline Problems

Solutions for issues with speed, resistance, or incline adjustments.

Fan, Noise, and Bluetooth Sync Issues

Addressing problems with the fan, operational noises, and Bluetooth syncing.

Nautilus E628 Specifications

General

Brand	Nautilus
Model	E628
Category	Elliptical Trainer
Language	English

Related product manuals