To Next Page

To Previous Page

UserProlesareassignedthedefaultvaluesuntiltheyarecustomizedbyediting.BesuretoedittheUserProleformore

accurate calorie and heart rate information.

FromthePower-UpModescreen,pushtheUserbuttontoselectoneoftheUserProles.TheConsolewilldisplaythe

nameoftheUserProleandtheUserProleIcon.

Edit User Profile

1. From the Power-Up Mode screen, push the User button toselectoneoftheUserProles.

2. Push the OK button to select it.

3. The Console display shows the EDIT prompt and the current User Profile name. Push OK to start the Edit User Prole

option.

 ToexittheEditUserProleoption,pushthePAUSE/ENDbuttonandtheconsolewillgobacktothePower-Up Mode

screen.

4. The Console display shows the NAME prompt and the current User Profile name.

Note: The User name will be blank if this is the first edit. The name of a User Profile is limited to 10 characters.

The currently active segment will flash. Use the Increase/Decrease buttons to move through the alphabet and blank

space (found between A and Z). To set each segment, use the Left() or Right() buttons to shift between segments.

Push the OK button to accept the displayed User name.

5. ToedittheotherUserdata(EDITAGE,EDITWEIGHT,EDITHEIGHT,EDITGENDER),usetheIncrease/Decrease

buttons to adjust, and push OK to set each entry.

6. The Console display shows the SCAN prompt. This option controls how the workout values are displayed in the Lower

Display during a workout. The “OFF” setting allows the user to push the RIGHT or LEFT buttons to view the other

workout value channels when desired. The “ON” setting allows the Console to automatically display the workout value

channels every 6 seconds.

The default is “OFF”.

Push the OK button to set how the workout values are displayed.

7. The Console display shows the EDIT LOWER DISPLAY prompt. This option allows you to customize which Workout

Valuesaredisplayedduringaworkout.

 TheLowerDisplaywillshowalloftheworkoutvalues,withtheactiveWorkoutValueashing.TheUpperDisplay

showstheactivevaluesetting:“ON”or“OFF”.PushtheIncrease() or Decrease() buttons to hide the active

workout value, and push the Left() or Right() buttons to shift the active workout value.

Note: to show a hidden workout value, repeat procedure and change Upper Display value to “ON” for that value.

When done with customizing the Lower Display, push the OK button to set it.

8. The Console will go to the Power-Up Mode screen with the user selected.

Reset a User Profile

1. From the Power-Up Mode screen, push the User button toselectoneoftheUserProles.

2. Push the OK button to select it.

Nautilus R614 User Manual

Other manuals for Nautilus R614