Nautilus R614 - Specifications and Assembly Preparation; Before Assembly

5
SPECIFICATIONS
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard,levelsurface.Allowaworkoutareaofaminimum77”x114”(196cmx290cm).
Basic Assembly Tips
Followthesebasicpointswhenyouassembleyourmachine:
• Read and understand the “Important Safety Instructions” before assembly.
• Collect all the pieces necessary for each assembly step.
• Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclock-
wise) to loosen, unless instructed otherwise.
• When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes.
• The assembly can require 2 people.
Maximum User Weight: 300 lbs. (136 kg)
Machine Weight: 84.2 lbs. (38.2 kg)
Power Requirements:
 OperationalVoltage:9VDC
 OperatingCurrent: 1500mA
Regulatory Approvals:
 ACPowerAdapter: ULlisted,Rated120V60HzInput,9VDC,
1500mAOutput.Class2.
This product, its packaging, and components contain chemicals known to the State of California to cause cancer,
birthdefects,orreproductiveharm.ThisNoticeisprovidedinaccordancewithCalifornia’sProposition65.Ifyou
wouldlikeadditionalinformation,pleaserefertoourwebsiteatwww.nautilus.com/prop65.
49.6”
(126 cm)
65.3”
(165.9 cm)
28.3”
(71.8 cm)