Nautilus R618 User Manual

55
6. Installation is the reverse procedure. Tape the cardboard
to the new Brake Magnet. Be sure the cardboard will
completely cover the new Brake Magnet before installation.
NOTICE: Do not crimp the cables.
7. Before fully attaching the Shrouds, remove the
cardboard from between the Brake Magnet (A) and the
Flywheel (B). Power up the machine to verify that the
Magnet Arm can move freely, and that the Brake Magnet and
)O\ZKHHOGRQRWWRXFKDWWKHPD[LPXPUHVLVWDQFHOHYHO
0DFKLQHLVRQ&XUUHQWLVDFWLYH7KHUHLVULVNRI
HOHFWULFDOVKRFN
If necessary, refer to the “Set the Brake Tension” procedure.
8. Final Inspection
Inspect your machine to ensure that all hardware is tight and
components are properly assembled.
Do not use until the machine has been fully
assembled and inspected for correct
SHUIRUPDQFHLQDFFRUGDQFHZLWKWKH2ZQHU¶V
Manual.

Nautilus R618 Specifications

General

Resistance Levels	25
Bluetooth Connectivity	Yes
Workout Programs	29
Resistance Type	Magnetic
Display	LCD
Heart Rate Monitoring	Contact
Warranty	10 year frame, 1 year labor