Nautilus R618 User Manual (English)

Other manuals for Nautilus R618

Questions and Answers:

E
evansdavidAug 16, 2025
What to do if my Nautilus Fitness Equipment won't turn on?
- A
  anthonyturnerAug 16, 2025
  If your Nautilus Fitness Equipment isn't turning on, start by ensuring it's plugged into a functioning wall outlet. Check the adapter and connection at the unit for any damage, replacing them if necessary. Inspect the cable for crimps or cuts, and replace it if damaged. Make sure the cable is securely connected and properly oriented, with the small latch on the connector snapped into place. Finally, examine the console display for cracks or damage; replace the console if you find any.
R
Rebecca RoseAug 22, 2025
How to fix a Nautilus R618 that won't turn on?
- J
  Justin SteeleAug 22, 2025
  If your Nautilus Exercise Bike isn't turning on, try these steps: * Ensure the bike is plugged into a working wall outlet. * Check the connection at the front of the unit to ensure it is secure and undamaged; replace the adapter or connection if damaged. * Inspect the data cable for any crimped or cut wires and replace if necessary. * Confirm the data cable is securely connected and properly oriented, with the small latch on the connector snapped into place. * Inspect the console display for cracks or damage, and replace the console if damaged.
S
Susan ReedAug 26, 2025
Why does my Nautilus R618 Exercise Bike display 'Please Pedal'?
- A
  Adam PatrickAug 26, 2025
  If your Nautilus Exercise Bike console shows a 'Please Pedal' error, it indicates a problem with the speed/RPM reading. Here’s what to check: 1. Inspect the data cable for any cuts or crimps and replace it if damaged. 2. Make sure the data cable is securely connected and properly oriented, ensuring the small latch on the connector snaps into place. 3. Check the magnet position on the pulley (this requires shroud removal) to ensure it is in place. 4. Verify the speed sensor is aligned with the magnet and connected to the data cable (this also requires shroud removal); realign the sensor if needed, and replace it if damaged.
S
Samantha CampbellAug 28, 2025
What to do if the resistance doesn't change on my Nautilus Exercise Bike?
- P
  Peter AlvaradoAug 28, 2025
  If the resistance on your Nautilus Exercise Bike isn't changing, even though the machine turns on, try the following: * Replace the batteries (if your model uses them) and check for proper operation. * Inspect the console for any signs of damage and replace it if damaged. * Check the data cable for any crimped or cut wires and replace it if necessary. * Ensure the data cable connections are secure and properly oriented, reseating all connections and making sure the small latch on the connector snaps into place. * Check the Servo Motor (requires shroud removal); if the magnets move, adjust them until they are within the proper range, and replace the Servo Motor if it's not functioning correctly.
S
Scott BensonAug 31, 2025
Why isn't the telemetric heart rate displaying on my Nautilus R618 Exercise Bike?
- S
  Steven ClarkAug 31, 2025
  If your Nautilus Exercise Bike operates but the telemetric heart rate (HR) is not displayed, consider these possible solutions: * If using a chest strap, ensure it is POLAR® compatible and uncoded, positioned directly against the skin, and the contact area is wet. * If the chest strap has replaceable batteries, install new ones. * Check the user profile settings on the console and ensure that the WIRELESS HR setting is turned ON. * Try moving the unit away from potential sources of interference like TVs or microwaves. * If the issue persists after eliminating interference, try replacing the chest strap.
R
Ryan HunterSep 3, 2025
Why is the contact heart rate not showing on my Nautilus R618 Exercise Bike?
- A
  Alan GarnerSep 3, 2025
  If your Nautilus Exercise Bike is working but the contact heart rate (HR) isn't displaying, check these items: * Ensure the HR cable is securely connected to the console. * Verify that the cables from the handlebars and the cable to the console are secure and undamaged. * Make sure your hands are centered on the HR sensors and kept still, with equal pressure applied to each side. * If you have dry or calloused hands, use a conductive electrode cream (heart rate cream) to improve contact.
A
andersonnicholasSep 6, 2025
What causes incorrect telemetric heart rate display on a Nautilus R618?
- D
  Dr. John GarzaSep 6, 2025
  If your Nautilus Exercise Bike displays the telemetric heart rate (HR) incorrectly, ensure that the HR receiver is not blocked by a personal electronic device placed on the left side of the media tray.
C
claytonnguyenSep 9, 2025
Why does the console on my Nautilus Exercise Bike keep cycling through program screens?
- M
  Michael BensonSep 9, 2025
  If the console on your Nautilus Exercise Bike is continuously cycling through program screens, it is likely in demonstration mode. To exit this mode, hold down the PAUSE/END button and the Left button together for 3 seconds.
P
philliphernandezSep 10, 2025
How to fix a Nautilus Fitness Equipment with no display?
- N
  nathanwrightSep 12, 2025
  If your Nautilus Fitness Equipment has no display, first ensure the unit is plugged into a working wall outlet. Next, check the adapter and connection at the unit for any damage and replace if needed. Inspect the cable for any visible damage like crimps or cuts, and replace the cable if necessary. Also, verify that the cable is securely connected and oriented correctly, ensuring the small latch on the connector snaps into place. Finally, check the console display for any cracks or damage and replace the console if damaged.
D
David ThompsonSep 12, 2025
Why is there no display on my Nautilus Fitness Equipment?
- J
  Jasmine SmithSep 12, 2025
  If there's no display on your Nautilus Fitness Equipment, it could be due to several reasons. First, ensure the equipment is properly plugged into a functioning wall outlet. Then, check the adapter and connection at the unit for any signs of damage, replacing them if necessary. Inspect the cable for visible damage like crimps or cuts; if any are present, replace the cable. Also, ensure the cable is securely connected and correctly oriented, making sure the small latch on the connector snaps into place. Lastly, inspect the console display for any cracks or damage. If damaged, the console should be replaced.

Nautilus R618 Specifications

General

Resistance Levels	25
Bluetooth Connectivity	Yes
Workout Programs	29
Resistance Type	Magnetic
Display	LCD
Heart Rate Monitoring	Contact
Warranty	10 year frame, 1 year labor