NC HT1.0 - Safety Decals and Descriptions

12
Safety Decals and Descriptions
SAFETY DECALS
The Machine is fitted with a number of safety decals placed in areas to draw the attention
of the users. It is important that before using the machine theses decals are read and un-
derstood. The decals must be clean and readable at all times, if they need to be replaced
they can be obtained from NC spares department.
Part No. Symbol. Descriptions.
DEC~1920-002 Hydraulic oil.
DEC~1920-003 Fuel.
DEC~1920-010 Ignition key positions.
DEC~1920-012 Seat belt must be worn.
DEC~1920-016 No repairs to ROPS.
DEC~1920-017 Pinch points.
DEC~1920-019 Caution moving parts / Do not open when hot.
DEC~1920-027 Fit skip prop before accessing area.
DEC~1920-031 Battery.
DEC~1920-032 Wheel nut torque / Tyre pressure.