NC HT1.0 - Engine Body Specifications (Continued)

19
Technical Specifications.
Engine Body (Continued)
Item Factory Specification Allowable Limit
Crankshaft to Crankshaft Bearing 2
Crankshaft Journal
Crankshaft Bearing 2
Oil Clearance
O.D.
I.D.
0.034 to 0.095mm
0.0013 to 0.0037in.
47.934 to 47.950mm
1.8872 to 1.8878in.
47.984 to 48.029mm
1.8891 to 1.8909in.
0.20mm
0.0079in.
-
-
Crankshaft to Crankshaft Bearing 3
Crankshaft Journal
Crankshaft Bearing 3
Oil Clearance
O.D.
I.D.
0.029 to 0.091mm
0.0011 to 0.0036in.
51.921 to 51.940mm
2.0441 to 2.0449in.
51.974 to 52.019mm
2.0462 to 2.0480in.
0.20mm
0.0079in.
-
-
Crankpin to Crankpin Bearing
Crankpin
Crankpin Bearing
Oil Clearance
O.D.
I.D.
0.034 to 0.098mm
0.0013 to 0.0039in.
39.959 to 39.975mm
1.5732 to 1.5738in.
40.004 to 40.050mm
1.5750 to 1.5768in.
0.20mm
0.0079in.
-
-
Crankshaft Side Clearance 0.15 to 0.31mm
0.0059 to 0.0122in.
0.50mm
0.0197in
Cylinder Liner I.D. D1105-E2B 78.000 to 78.019mm
3.0709 to 3.0716in.
78.15mm
3.0768in.
Cylinder (Oversized) D1105-E2B 78.500 to 78.519mm
3.0906 to 3.0913in.
78.65mm
3.0965in.