NC HT1.0 - Fuel System Specifications (Continued)

22
Technical Specifications.
Fuel System
Item Factory Specifications Allowable Limit
Glow Plug Resistance Approx 0.9Ω -
Starter (Planetary Gear Reduction Type)
Commutator
Difference
Mica
Brush
O.D.
O.D.
Undercut
Length
30.0mm
1.181in.
Less than 0.02mm
0.0008in.
0.50 to 0.80mm
0.0197 to 0.0315in.
16.0mm
0.630in.
29.0mm
1.142in.
0.05mm
0.0020in.
0.20mm
0.0079in.
10.5mm
0.413in.
Starter (Electromagnetic Drive Type)
Commutator
Difference
Mica
Brush
O.D.
O.D.
Undercut
Length
28.0mm
1.102in
Less than 0.05mm
0.0002in.
0.50 to 0.80mm
0.0197 to 0.0315in.
16.0mm
0.630in.
27.0
1.063in.
0.4mm
0.016in.
0.20mm
0.0079in.
10.5mm
0.413in.
Alternator
Stator
Rotor
Slip Ring
Brush
Resistance
Resistance
O.D.
Length
Less than 1.0Ω
2.9Ω
14.4mm
0.5669in.
10.0mm
0.3937in.
-
-
14.0mm
0.5512in.
8.4mm
0.331in.