NC HT1.0 - Service Schedules - Chassis Grease Points

26
Service Schedules
DUMPER CHASSIS
Grease Points
Operation 10
Hr
50
Hr
100
Hr
500
Hr
1000
Hr
Skip Pivot Pins (1 Pin, 2 No Points) ●
Hi Lift Arm Pins (4 No Points) ●
Parallel Link Arm Pins (2 No Points) ●
Tipping Ram Pins (2 No Pins) ●
Hi Lift Rams (4 No Points) ●
Centre Point Articulation Casting (2 No Points) ●
Steering Ram (2 No Points) ●