EasyManua.ls Logo

NC HT1.0 - Low Fuel and Air Bleeding; Low Fuel Warning; Air Bleeding Procedure

NC HT1.0
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
Fluids & Lubricants
LOW FUEL
Be careful not to let the dumper run out of fuel. A low fuel warning light is on the instrument
display will illuminate when the fuel level drops to the minimum recommended level.
If the dumper runs out of fuel it will be necessary to bleed the fuel system before the next
engine start.
Fuel gauge
Low fuel light
1. Loosen the vent plug on the top of the
Fuel Injection Pump (FIP)
2. Pump fuel using the lever (B)
3. Re-tighten plug (A) when bubbles do
not appear anymore.
(A)
(B)
Ensure the air vent plug
is tightened after bleeding
or the engine may stop
AIR BLEEDING PROCEDURE

Table of Contents

Related product manuals