X350 and X550 User Manual
Page 34
NOTE: Changing the PCI card’s resolution and/or color depth is only allowed from the
Administration console on the local system. Properties for cards inside other network
systems can be remotely viewed, but resolution/color depth changes cannot be remotely
applied.
Right-click a station in the left window to force that station (and the associated user
session) to stop. Note: you can also stop the station by clicking the red “Stop” button in
the tool bar when you have selected a station. A confirmation window will appear and
ask if you want to stop the selected station. It also reminds you to exit all programs and
log off the station. In the same way you can also start a station either by right-clicking the
station and selecting “Start Station” or by clicking the triangle button (next to the stop
button) in the toolbar at the top of the window.
To Next Page
Loading...
Need help?
General
