X350 and X550 User Manual
Page 41
This machine: the name of the host PC. This setting is read-only.
This user: the currently logged-in user’s username. This setting is read-only.
System uptime: how long the system has been up. This setting is read-only.
Start stations at boot?: whether or not the stations start when the host PC
boots. You can set this to either on or off.
Disable Send Broadcast Message: sets whether or not the administrator has
disabled broadcast messages from the NComputing vSpace icon in the Windows
System Tray. You can set this to either “Yes” or “No.” When set to “Yes,” a user
cannot access the vSpace console to send a broadcast message. If set to “No,” a
user can send broadcast messages from the vSpace console. To send a
broadcast message, go to Local settings in the vSpace console right-click on
the station number enter a message send the message.
Disable console in context menu: when enabled, the user cannot launch the
console from the NComputing vSpace icon in the Windows System Tray.
Support WTSAPI32 Interface: (This option may be disabled in some versions of
vSpace.) Controls whether support for the WTSAPI32 application interface is
turned on or off. This setting is intended to support certain management
applications.
Do not display last user name: when enabled, the user name field in the
Windows logon screen will not be auto-populated with the information from the
last user to have logged into a session on that station.
Administrator Password: used to enable and define an administrator password.
You can change the administrator password properties.
Autologon on the Host Station: used to enable the host PC to start without the
Windows logon screen and to define the username and password to use to
bypass the logon screen. You can enable or disable autologon and define the
username and password.
The "Serial Numbers" item shows a list of serial numbers of access devices that have
connected to the vSpace software. For each serial number, it shows the number of
licenses required for that access device, the station number (if available), whether or not
it is registered and the location of the serial number record.
To Next Page
Loading...
Need help?
General
