Setup 30
Keyboard: F4
Language: [US, U.K., Danish, Finnish, French, German, Norwegian, Portuguese, Spanish, Swedish, Dutch, Belgian-Flemish, French-Canadian,
Italian, Latin-American, Swiss-French, Swiss-German]
Choose the language that matches the keyboard.
Char Set Mode: [PC, ANSI, ASCII]
Choose character sets used for 20-7Fh (GL) and A0-FFh (GR). In VT emulations, the default is ANSI. T
he table
below can be used to determine which sets are loaded for each mode, depending on “Char Set Mode” and “UPSS”
(in the Emul (
F9) menu).
Char Set
Mode
(F4 menu)
Char Set
(F9 menu)
Language Default Character Set
PC GL Multinational
National
Any
Any
ANSI Standard
PC-NRC
GR Multinational
National
US or UK
French Canadian
Norwegian
All others
Any
PC-Multinational
PC French Canadian
PC Norwegian
PC Multinational
Extended
PC-Multinational
ASCII GL Multinational
National
Any
Any
ANSI Standard
ASCII-NRC
GR Multinational
or National
Any
Any
PC-Multinational
ANSI GL Multinational
National
Any
Any
ANSI Standard
ASCII-NRC
GR Multinational
or National
Any
Any
ISO-Latin/ANSI Supp
Key Mode: [ASCII, ScanCode]
Select whether keys transmit ASCII codes or the ScanCode. The ScanCode transmits a “make code” when a key
is press
ed and a “break code” upon its release. When ScanCode is selected, “Comm Mode” is forced to Full
Duplex and “Character Set” is forced to Multinational (8-bit).
Keyclick: [On, Off]
Choose whether pressing a key results in a clicking sound. The default is off in SCO Console emulation.
Key Repeat: [On, Off]
Choose whether keys, including function keys, will repeat when pressed for more than half a second. This
setting do
es not affect the following keys on the keyboard:
Caps Lock, Scroll Lock, Num Lock, Shift keys, Ctrl keys, Alt keys, Return, Print Screen, Pause.
Lock, F1-F5, Shift keys, Control, Compose, and Return.
Key Rate: [15 cps, 20 cps, 30 cps]
When “Key Repeat” is on, a key that is pressed for more than half a second will automatically repeat. This
sel
ection allows you to choose the number of characters that are generated per second when a key is auto
repeating.
Margin Bell: [On, Off]
Choose whether a bell tone sounds when the cursor is nine positions away from the right margin.
Key Lock: [Caps, Reverse, Shift]
- this setting affects the state of alphanumeric keys when Caps-Lock is engaged.
Caps cause
s alphabetic keys to be uppercase regardless of the Shift key.
Reverse me
ans that pressing the Shift key will generate lower-case alphabetic keys.
Shift cause
s all alphanumeric keys to be generated as uppercase (or shifted, in the case of numbers). If the
Shift key is hit, while Shift is selected, Caps-Lock will be disengaged.
To Next Page
Loading...
