Desk Accessories 45
Color Utility
The Color Utility (260lfc only) is used to temporarily remap Colors and attributes on screen.
Changes make to any of the pre-defined palettes with this utility cannot be saved. To define your own color
combinations, use the provided soft palettes.
To alter the color mapping for an attribute, use the up and down arrow keys to highlight one of the sixteen
available attributes. Then, use the left and right arrow keys to select the background and foreground colors you
want to assign to the highlighted attribute. Finally, press the Esc key to exit Desk Accessory Mode and view the
Results on screen.
Only eight attribute combinations are defined for Wyse 325 and Wyse 60 emulations.
An example of the Color Utility is shown below.
ATTRIBUTE FORE/BACK
NORMAL TEXT
REV TEXT
INT TEXT
REV, INT TEXT
UND TEXT
UND, REV TEXT
UND, INT TEXT
UND, REV, INT TEXT
BLINK TEXT
REV, BLINK TEXT
INT, BLINK TEXT
INT, REV, BLINK TEXT
UND, BLINK TEXT
REV, UND, BLINK TEXT
INT, UND, BLINK TEXT
INT, UND, REV, BLINK TEXT
Right Arrow Foreground Color
Left Arrow Background Color
Color Utility Desk Accessory Display
To Next Page
Loading...
