Setup 36
Tabs: F10
Auto Init Tabs: [On, Off]
When on, tab settings will always be defaulted at power up.
Default Tabs: T
his action field sets tabs at every eighth column starting at column 9.
When the cursor is placed in the Tab Map, the keys below will appear in the Choices field:
<Space> – clear the current tab setting.
<Shift> <Backspace> – clear all tab sett
ings.
<T or t> – se
t a tab at the current location.
< ↑
→ ↓ ← > – move cursor on the Tab map or back to a Parameter field above the map.
Answerback: F11
Answerback Mode: [On,
Of
f]
Choose whether the answerback message (which is sent to the host at terminal reset or power up) mode is on.
This can be
used to log-in to the system.
Answerback Conceal: This is an action parameter which displays “Concealed” at the answerback edit field. Once it
is concealed, the message cannot be redisplayed. This is a security measure for those who use answerback to
send their login names and passwords to the host.
Answerback Message: This is a 30-character field which can be edited. (See the Edit Fields section later in this
chapter.)
When “Fkey Speed” is Fast in the Emul (F9) menu, the answerback edit field is limited to 8 bytes.
To Next Page
Loading...
