Using Your Robot With the Neato App
HOUSE CLEANING
Selecting House Cleaning sets your Neato robot to clean the entire floor on one level automatically moving from
room to room.
From the app you can Start, Pause, Resume, Stop, and Return to Start/Base.
Note: When canceled mid-cleaning, your robot will stop in place. You can ask your robot to return to its base station
using the Neato app. If the robot has detected the base, it will attempt to return to base and dock.
SPOT CLEANING
Selecting Clean Spot sets your Neato robot to clean a 7’x7’ area and you can also select 2-pass cleaning (available
only on specific models).
SCHEDULING YOUR NEATO ROBOT
Set up a schedule for regular vacuuming. You can set your preferences based on cleaning days and times.
NOTE: If you are going away, you can turn OFF Enable Schedule to put the schedule on hold.
PUSH NOTIFICATIONS
By turning on push notifications in the app, your robot can notify you about its status. Your phone/tablet will display
messages such as cleaning complete, alerts, etc.
ROBOT SOFTWARE UPDATES
Keep the software on your robot current. You can initiate a robot software update using the Neato app. Or, you can
manually update the software directly on your robot.
SMART WATCH CAPABLE
If you have an Apple Watch or Android Wear smart watch, you can access some features on your watch such as
start, stop, and receiving notifications. Your watch needs to be in the vicinity of your smartphone for these features to
be accessible. After you have paired your smart watch with your smartphone, go to the watch app on your
smartphone and turn access on to the Neato app to view features on your watch.
TROUBLESHOOTING YOUR DEVICE
When an error occurs during operation of the robot, you can click the error link in the Neato app to see what it means
To Next Page
Loading...
