ACTION
INFO LED
Start Cleaning
Press Start Button 1x for house
cleaning
Press Start Button 2x for spot
cleaning
Solid Blue
Solid White
Pause/Resume
Cleaning
Press Start Button during
cleaning to pause robot.
Press Start Button again to
resume cleaning.
LED pulses
during pause
Cancel
Cleaning
Press & hold Start Button for 5
seconds
Robot & LEDs
turn off & robot
plays a tone.
NOTE: if the INFO LED light is blinking red or solid red, your robot needs robot maintenance or your robot has a
navigation Please check the troubleshooting section of this guide.
BATTERY LED
ROBOT
IS:
LED
COLOR
WHAT IT MEANS
Cleaning
Solid
Green
Battery level is normal
Solid
Amber
Battery level is low.
Battery must be charged
before a new cleaning can
be started
Charging
Pulsing
Green
Battery is charging and
robot can start cleaning
Pulsing
Amber
Robot is fast-charging the
battery and must
complete before cleaning
can start
NOTE: If Blinking Red, please check the troubleshooting section of this guide.
Preparation and Set Up
REMOVE FILMS AND STICKERS
IMPORTANT: Remove all protective films and shipping material from the robot and charge base. If they are not
removed, your Neato robot will not operate correctly.
SET UP CHARGE BASE
Plug the power cord securely into the charge base.
Adjust the length of the cord by wrapping it as shown.
To Next Page
Loading...
