NEC CP/M-86 - Page 148

GSX-86: Graphics for the APe
9-16
The default color table should be set up differently for a monochrome and a color
device.
Monochrome
Index Color
0 Black
1
White
Color
Index
Color
0 Black
1
Red
2
Green
3 Blue
4 Cyan
5 Yellow
6
Magenta
7
White
8-n
White
Other default values that should be set by the driver during initialization are:
Character height = minimum character height
Character up vector = 90 degrees counterclockwise from the right hori-
zontal
(0 degrees rotation)
Line width = 1 device unit (raster, plotter step)
Marker height = minimum marker height
. Writing mode
= replace
Input mode = request for all input classes (locator, valuator, choice, string)