NEC CP/M-86 - Page 189

Auxiliary Character Generator RAM Format
LOADING THE AUXILIARY CHARACTER FILE
Use the following procedure ~o load the auxiliary CO RAM with data from the file
(file type
CHR) generated by the CHR utility.
1. Open the CHR file.
2. Read the CHR file into the temporary user buffer that is automatically
created by the CHR utility. (See file format below.)
3.
Transfer the data (8K bytes) in the user buffer to the auxiliary CO RAM,
starting at D8000H, by word.
CHR TYPE FILE FORMAT
Header (128 bytes)
reserved
for future use
character
character
character
character
0
I
2
3
4
5
6
7
8 9
10
11
C-3