NEC CP/M-86 - Page 207

CP/ M-86 Error Messages
ERROR: DISK WRITE - {filespec}
PIP. A disk write operation cannot be successfully per-
formed during a PIP command, probably due to a full
disk.
You should either erase some unnecessary files or
get another disk with more space and execute PIP again.
ERROR: FILE NOT FOUND - {filespec}
PIP. An input file that you have specified does not exist.
ERROR: HEX RECORD CHECKSUM - {filespec}
PIP. A hex record checksum was encountered during the
transfer of a hex file. The hex file with the checksum error
should be corrected, probably by recreating the hex file.
Error in codemacro building
ASM-86. Either a
codemacro contains invalid state-
ments,
or a codemacro directive was encountered outside
a codemacro.
ERROR: INVALID DESTINATION
PIP. The destination specified in your PIP command is
illegal. You have probably specified an input device as a
destination.
ERROR: INVALID FORMAT
PIP. The format of your PIP command is illegal. See the
description of the PIP command.
ERROR: INVALID HEX DIGIT - {filespec}
PIP. An invalid hex digit has been encountered while
reading a hex file.
The hex file with the invalid hex digit
should be corrected, probably by recreating the hex file.
ERROR: INVALID SEPARATOR
PIP. You used an invalid character for a separator
between two input filenames.
G-5