NEC DT300 Series - Speed Calling and Directory Operations

26
4. FEATURE OPERATION
To Originate a Call Using Speed Calling
(One-touch Speed Calling keys)
 Press the desired Speed Calling key,
or press Speaker and Speed Calling key.
To program
(Available only on DT Series with One-Touch Speed
Calling key.)
 Press Feature button.
 Press desired Speed Calling key.
 Enter desired telephone number or feature access
code on the keypad.
Display indicates the digits dialed.
 Press Feature again to save the number.
SET
4:26 PM TUE 12 FEB 2008
To verify
 Press Feature button.
 Press desired One-Touch Speed Calling key.
 Display indicates digits programmed.